Download Newsletter

Website development

We are continually updating our website and whenever we make a major change (i.e. Add pages, update download page, add news articles) we will post the change here with the date of the update. This will ensure you can go straight to the relevant change and if necessary download the changed files.

19th May 2010

Amended news page

ECR 1457 Website Issue 3.16

 

Baldwin Boxall Launch New Products

 

BVRD2M4 Mini – four zone voice alarm / voice evacuation router. This new unit retains many of the features of the well image description established EVAS BVRD2M router. However, it is small enough to fit alongside a VIGIL2 amplifier and power supply in one amplifier mainframe .Features include:built-in real time clock, six flash stored messages, automatic amplifier changeover, ambient noise sensing, decentralised networking, fully configurable using USB2 connection and many more.

 

BVRD microphone controller. This unit has been designed specifically for the voice alarm (VA)and voice evacuation (VE) market and will interface with our VIGIL2 routers. The BVRD performimage description s as a paging microphone, fire microphone or an emergency ‘all call’ microphone.The new microphone controller features LCD screens to indicate zone name, input source and fault status. There is also a screen which allows the user to scroll through pre-recorded messages stored on the EVAS router.The fully monitored unit includes features such as: all call paging, programmable function keys, emergency control mode, volume adjustment for any zone, fault indicators and much more.

Digital Network Cards. Baldwin Boxall will also be showcasing a range of digital network cards for the VIGIL EVAS DSP-controlled voice alarm routers (BVRD2M and BVRD2M4).The BVRDNET controller is an internal module fitted to each router. The network interface modules (BVRDCIF & BVRDFIF) connect to the controller using CAT5 patch leads, and provide a simple DIN rail mounted connection to either a copper or fibre network. The main advantage of this system is that it enables multiplexing ~ up to 14 multiple signals (audio/data) simultaneously transmitted over the network. This minimises system cabling requirements.The network can be either copper using a BVRDCIF interface module, or fibre using a BVRDFIF module. If you require any further information on any of these products please feel free to contact us. 

 

The OmniCare Range – PRODUCT CHANGE

Since its introduction in June 2008, OmniCare has become the system of choice – enabling fire telephones, disabled refuge remotes and disabled toilet alarms to be connected (via loop circuits) to a single central control panel. The system also provides the option of slave control panels, for placement in stairwells for example, should this be required.

This range has seen revisions and this news article is to keep you up-to-date with the changes.

Back Box – new design:

The back box for the standard disabled refuge remote (BVOCECP and BVOCECPS) and the repeater unit (BVFREPEM) has been improved. These changes are taking place to assist with the installation and prevent incorrect wiring issues.

What has changed?

  • The depth of the box will be increased by 12mm (to 58mm)
  • Two extra ‘knockouts’ will be included on the back of the unit
  • Box will include a fitted termination card

We are sure you will agree that these changes will be of great benefit, saving valuable site time and, by preventing incorrect connection, should avoid delays due to damaged products.

The new style units were introduced during Spring 2009.

IMPORTANT

Wiring of Refuge Remotes

Some remote units are being returned to us reported as faulty, however, upon testing they are either found to be in proper working order or have been damaged due to incorrect installation. It is imperative that electricians/engineers on site follow the instructions provided when connecting the disabled refuge remotes. In particular they MUST check cables prior to powering up. Connection and powering up, as described in detail in the manual, prevents damage to equipment. Therefore, could you please ensure that installers read the instruction manual provided.

 The introduction of the new back box, as detailed above, should prevent future problems.

Obsolete Products

  • Just to remind you: OmniCare replaces the AssureCare, CommuniCare, CommuniCare Advance and FireCare ranges which were made obsolete on 1st June 2008.

 

 

NEW FORMAT: CDP ENGINEER TRAINING - introduction to Voice Alarm

The format for the in-house engineer training has been revised.

Baldwin Boxall now provides two training courses ‘DAY ONE – an introduction to voice alarm’ and ‘DAY TWO – further considerations for voice alarm’

Both courses are CPD approved – DAY ONE providing five hours of CPD training and DAY TWO providing two hours. (NB: although DAY TWO only provides two hours for CPD purposes it is a full one day course – please see agenda below).

It is recommended that engineers attend the ‘DAY ONE’ then a month or two later attend the ‘DAY TWO’ as a follow on.

The cost for attendance (account holders only) for each day is £75.00 per person – we provide all refreshments and lunch. (Please provide information on any special dietary requirements on booking).

At the end of the training engineers will be provided with CPD certification and a selection of CPD approved handouts.

The new agenda can be seen below:

Day One

Arrival at 9:15 am for coffee/9:30 am start.

  1. Concepts of Voice Alarm
  2. Voice Alarm System Overview
  3. The Standards & Monitoring
  4. Basic System Elements
  5. 100V Line
  6. Electrical Principles – Impedance
  7. Routine Maintenance
  8. Fault Status
  9. Practical – Servicing
  10. Configurator Program
  11. Test & Certification
  12. Conclusion – approx 4:30 pm.

 

Day Two

Arrival at 9:15 am for coffee/9:30 am start

  1. Test paper (from DAY ONE) – knowledge assessment
  2. Relevant standards
  3. Aims of a good voice alarm system
  4. Design
  5. Practical – interpretation of CAD drawings
  6. Network distribution
  7. Fire panel interface
  8. Loudspeaker circuits
  9. Ambient noise sensing
  10. Control equipment
  11. Hands on & programming
  12. Test & Certification
  13. Conclusion – approx 4:30 pm.

For further information, dates or to book space, please contact Joanne Trent.

We can also offer other types of training, so if you require further development in any area please do not hesitate to contact us.

 

OmniCare 200m Rule

As mentioned in our literature, it is important that the 200m cabling rule is adhered to. Up to  200m of cable can be run between remote units and master control panel. Any more than 200m requires the use of a repeater module (BVFREPEM).   Additionally, the number of remotes will affect the maximum length of a single ring.  Please use the table below as a guide.

Number of remotes per ring

15

20

25

30

Maximum ring length (metres) (1.5mm cable)

1,900

1,300

900

600

 

Photos of installations.

We are currently creating a photographic library of external photos of locations where Baldwin Boxall equipment has been installed. This will also
provide ideas for future press releases. The pictures can be in any format and any slides, transparencies or photographs will, of course, be returned.